Motorhome & Recreational Vehicle Resource

Since 1996

Search RV-Coach Online

I have water damage in my GMC bus. Is there an easy way to remove the flooring?
Unfortunately, all methods of floor removal are laborious. Here's one way: You'll notice for each board in the floor there are no less than eight bolts with 1 inch diameter heads (or something similar). Use a hole saw to remove the area of the flooring that has the bolts, and then break up the rest of the boards as you see fit. Also, there is a small lip near the side wall where the ply wood sheets slide under. Don't remove this, but rather keep it in place and remove the ply wood from underneath it.


Advertise Here
Get Media Kit NOW!






Get Media Kit to Advertise!

Advertiser Links

Back to Top