ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
I Guess I would start at the dealer,but if to old look at something newer and see if you can make it fit.If you have to cut and fit to get one you can easly calibrate it.As long as it reaches down in to the pan.Look at new one to get length into the pan.If you can get it to go into the pan.After install drain all oil except filter.Put dip stick in. install 6 qt of oil and let sit for a while,then you can figure where a full mark should be.Just mark the dip stick with a file. Good Luck Mike PS check distance from bottom end of tube to end of stick with stick pushed all the way into tube before you install.Just don'tput to long of stick in.