ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
My son has a 1995 Ford Probe, We have changed the plugs, wires, Dist. cap. & the distributor. A mech. told us it might be the Mass Air Sensor, we changed the M.A.S. and it still is not working corecctly. It will start, but after running for a while, it sound like it is missing. It won't go over 45 mph, it wont idle & it stalls if you sit still.
Apparently we have changed the fuel pressure regulater swich, it's been at a Ford service shop and it was put on the computer there. According to the mech. the computer reads the Mass air flow, but we have put 4 Mass air flow sensors (the entire throttle body, and map sensors) and the car just got worse everytime. The fuel system was supposedly check at the Ford dealership. We are getting a rich code in bank one. We cleared the computer before we took it to the Ford Dealership. It has been on 2 different computers now. Boy this is frustrating. Any suggestions would be helpful (except the one suggesting we get rid of the car)
I have a 95 probe 2.0 and it was doing the same thing. If you already change distr.and cap, m.a.s and fuel reg. switch. the same thing i did. try changeing the E.G.R valve.when u take it off u should be able 2 put ur fingures on the inside and push up and down. If nothing and it is fozon solid like mine was then it is bad good luck