ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
I have been having issues with blown fuses when running power (DC) from the battery. Everything has functioned normally when connected to a 110V land line until last night. Now, everytime I replace the fuse and flip the breaker, the fuse blows. IS this a convertor problem or possibly a short somewhere? Any ideas?
Were is what I would try first thing.I would remove all the 12 volt fuses in the converter output circuit and then turn on the 110 v ac breaker and see what happens.If it still blowes breaker then a bad converter.If does not blow the breaker then start replacing fuses one at a time and see what fuse causes the breaker to blow. Good Luck Mike