 |
Well that can be hard but lets see. first are you using an extension cord if so keep it short as possible and as heavy duty as possible make sure its a three prong 15amp,if your just hooked to your 30amp cord and this is happining than you will need to inspect the converter juntion for loose ground leads also in your 110v service plugs if those check out than next would be your electrical heating element on your refer with a multi-meter check the ohm resistance and loop your resistance should be 0.42 0.47 in that range and make sure its not grounding itself on the casing if all that checks out than its on to the house and checking ground and nutral being that most hosehold wiring is gfi protection of nutral service hope that this help |
RV and bus conversion info since 1996.
email RICK HUMPHREY
reply to message
search forums