ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
My tag brakes are Midland. The master cylinder on the Ultravac has two bleed nipples, one at the output end and one at the mounting end. Do I pressure bleed this from the reservoir like most other master cylinders? What is the purpose of the two nipples?
I am trying to locate the brake valve for the tag axle on a 1993 Fleetwood motorhome. The original number was C2904E and I believe there is a crossover number the repair shop has found which is KN35100. However, all of this has been to be to no avail as no one seems to have any idea as to where to locate this part.
Hi Pete,
The MorRyde tech people said #C2904E wouls be available at Haldex Spring system, 620-365-6911. I did not call them or check to see if they have them.
Perhaps you can help me with a problem with my newly purchased 92 Pace Arrow. I have the old Midland system. The problem I'm having is spongy pedal - presses down a long way - won't pump up - I have enough brakes to drive but would like to have a firmer pedal. I checked with the tag off the ground and when my wife depresses brakes (engine running), they started to drag when the brake light come on - at the top of the pedal. However, she pressed about 3" before I could not turn the tag wheel any more. Tag fluid OK, brake adjust screw is about 3 clicks from draging alot. Got any ideas??