ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
My original problem was like many others here on the board. My front left wheel would lock up after hard braking.
I purchased new flex brake lines for the front and preped for the install. Unfortunately when I started the RV to to pull into onto the carport the pedal went straight to the floor. I checked the master cylinder and the fron(large reservoir) was empty. So I topped it of and still no resistance on the pedal.
I went ahead and replaced the lines but still have nothing on the pedal. Is this a MC issue. I was going to bleed the brakes but it feels like its not pumping at all.
Update:
After using a few choice 4 letter words I finally got the master cylinder removed. It appeared to have a minor leak on the side connected to the hydro boost.
I put the MC on my work bench and cyled it with a screwdriver and only one of the reservoirs shot fluid out. Bad MC verified on bench test also.
After a short trip to autozone for an $18 dollar purchase I began the install. Few more 4 letter words and it was in.
After bleading down the brakes the pedal imediately firmed up. Road test was better thanexpected.