 |
I am guessing two seperaate problems. If it won't crank hot it is generally a starter over heat. If it just won't start we need to look for failing or overheated electronic components. In both the starter and electronics for missing heat sheilding. Next we need to look for spark when it wont start, Injection etc. Cranking and not starting should show a code, if it won't you need to get a good scan tool and watch the sensor inputs etc while cranking. I have seen fuel pumps and fuel pump relays refuse to work after a hot soak. These would not show on the scan. Good Luck |
RV and bus conversion info since 1996.
email BUBBA THE BUS TECH
reply to message
search forums