 |
I have a '95 Camaro with a 3.4 V-6 automatic tranny. It started throwing tranny fluid from the inspection cover one weekend really bad. I removed the cover but could not find the source. I had noticed the trans slipping a little in OD so I decided to pull it and rebuild it. As I rebuilt the 4l60e I found a cracked converter and burned clutches in the overdrive clutch pack. I went completely through the trans(just like I have done many times succesfully before) and found no other issues. I reassembled it with all new Alto seals and clutches (with new steels) and put it back in the car. Now it will not move when put in Drive or Overdrive but has good reverse, 1st, 2nd and a mildly slipping 3rd only when manually shifted. I have changed one of the A/B solenoids that looked questionable but no help. Fluid looks good as does everything else. What have I missed or done wrong? Thanks for any help in advance.
Mark |
RV and bus conversion info since 1996.
email Mark
reply to message
search forums