ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
I have just purchased a 1964 IH/Carpenter schoolbus and I need info on it. It has a RD406 6cyl. gas engine and delco remy ign.alternater etc. what I need most is electrical help.schematics would be great.
Any manuals or advice would be apprecited.
thanks,
Lars
The electrics in a Carpenter bus are pretty straight forward. The schematic was usually glued to the underside of the First Aid compartment.
If that has detoriated or disappeared you will have a bit of a problem finding a new one since Carpenter is out of business.
The IHC stuff is exactly the same as the same vintage IHC truck. Your local IHC/Navistar/International dealer should be able to help you with those sorts of details.
The only hard part of figuring out the wiring on any conventional school bus is the interface between the body and the chassis. Sometimes the interface can be problematical.
If you could be specific about the problems you are having I might be able to be specific with some help for you.
Hi:
the rear work lights only come on when in reverse are park brake set want to wire where work just on off switch when brake is not set are not in reverse
this is on a 2002 9300 navistar