 |
Just make sure you have an instructor who knows All about working metal. It looks simple but each weld must be done in the right sequence. If done wrong it can put stress on the metal. Anyone with fabrication experience should have that knowlege. If the welding is done wrong it can be corrected with heat. It is better not to have to do the stress relieving. The frame has a lot of reduntancy built in to it also. Just be careful & take lots of measurements.
I have a '69 05 with some rust issues, www.eaglespirit.us. I have 20 years as a construction Boilermaker doing metal fabrication & I'm a certified preasure vessel welder. |
RV and bus conversion info since 1996.
email Jim
reply to message
search forums