 |
When I turn the switch on, nothing happens. The only thing done to it before this started was a solenoid swtch put on. The negative battery cable connects to the side of the motor home with a short cable, then a longer cable takes it & connects to the very back of the transfer case and the frame.The positive cable connects to the left side of the switch. Another big black cable connected to the left of the switch is also connected to the starter relay. On the right side of the switch a big black cable is connected and goes back to the generator. A small wire is connected to the center of the switch and runs to the front of the motor home. It goes through the floor, I can't tell where to. Any advice appreciated. |