ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
I have a Norcold N621 that will run on propane for 12 hours or so and then not work (only propane, electric is fine) What happens is that the burner will light but the ingnitor continues to spark as if it is not sensing the burner being lit. After several attempts it shuts down the gas thus shutting down the burner. If I let it set for several hours it will again light with no problems. I would appreciate any comments. Thanks.
Try this thread..http://72.14.253.104/search?q=cache:B1inw4X7Ue8J:64.79.208.71/forum/view_topic.php%3Fid%3D3721%26forum_id%3D26+unlocking+norcold&hl=en&ct=clnk&cd=1&gl=us there is an unlock procedure within this manual before you buy a new control board... here is the manual, go to the troubleshooting section and it tells you how to unlock the board...page 24
Hello,
I have the Same Model and Same Problem, Ive blown the back of it out with air and it still happens. I too have been thinking of replacing the Control Board, but was wondering if anyone else might of Tried that already? WIth Same Results?
Thanks for your Time
Randy
I have the same fridge, same problem. It stops sensing the flame and begins sparking to relight but already lit. Seems to happen after it has run for awile like something on the circuit board is getting hot. I too would like a schematic for the board to pinpoint the flame sensor.
We broke down and bought a control board, my husband put it in and the fridge never worked so well. We did all the cleaning of contacts, gas port, etc. nothing worked so we were left with no choice but to try the board glad we did. If anyone has the electrical schematic that Scott asked for we would like it also. My husband would like to try and trace the problem out on the old control board.
My Norcold N621 wont't cool it turns on no noise and keeps blowing the 5 amp fuse on the board What coul it be io replace it but blows again get f an A messages please help
I ALSO HAVE THE SAME PROBLEM.THEY SAY IT IS THE CONTROL BOARD. I TREID TO FIND THAT AND FOUND A POWER SUPPLY BOARD AN A PC BOARD. WHICH IS IT AND WHERE CAN I BUY ONE
I have the same problem with the propane. Now I keep blowing the 5amp fuse in the control board when I try to use electric??? Any ideas? Is the board bad???