Motorhome & Recreational Vehicle Resource

Since 1996

Search RV-Coach Online

Email Author email David  Reply to Message reply to message  Post New Message post new message      search forums
ATTENTION: DO NOT POST ADS IN FORUMS!
All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
All Messages in ThreadAuthorDate
Rv furnace 8500 III replace the electrode David 11-22-16  
I would like to know the easiest way possible to replace the electrode in my furnace? Need to get it done asap!
Re: rv furnace 8500 III replace the electrode Keith 11-22-16  
Hi David, Turn off propane and T'stat, remove the exhaust tube, take the propane line loose, take the igniter wire(red)loose and one quick disconnect wire (both on propane line side), remove 3 - 4 screws from around the exhaust hole area that holds the burner in and one on the round edge, pull out the burner, you may have to push the propane line out of the way, be careful not to damage the flare on the tubing. Remove and replace the electrode/igniter. The gap is 1/8 inch from the tip of electrode to the burner face and between the curved tip electrode and straight one. Be careful not to crack the porcelain insulators when adjusting. Reverse all this to install. Leak check the propane line with soapy water before starting the furnace. Good luck
Required fields in red
For more info about a field, place your mouse over the More Info icon.
Subject:
Your Name:
Your Email:
Message:



Code is case-sensitive. Helps stop SPAM.
       


Advertise Here
Get Media Kit NOW!






Get Media Kit to Advertise!

Advertiser Links

Back to Top