ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
Looking for the voltages to ignitor and
gas valve.
Unit blower comes on and does not light
was working fine then next on stopped.
after pulling burner I do need to replace the burner,it had a hole in it.
Hi John, You should have a minimum of 10.5 volts to the gas valve and it should draw no more than.48 amps. After checking the plug connector on the Circuit Board for dirt and lint, take the board to an RV shop and have it tested, these are the easiest and first things to check for no spark. Good luck