ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
When I turn on the water heater, it ignites for about 30 - 45 sec. then turns off. It takes a while for it to tunn on again, I get very little hot water(warm)??
Hi Rich, Could be a number of things... the board may not be seeing the flame - check that the ignitor/sensor is in the flame. Check for cleanliness of the orifice and burner tube and the connector on the board and all other connections (ground etc.) The circuit board may be tested on the same tester as a furnace board at your friendly RV shop depending on the type board. Good luck