ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
I have a 1991 dutchman trailer. The furnice will run OK for a while the fan
and flame will function normally. Then after the furnace run on and off through the night and then after it has started up and the flame turns off the fan will just keep running and not shut down. any suggestions?
Hi Earl, Hard to say from here, but could be your LP pressure is to high (over fired), an obstruction/kink in the ducting or you have a register or two covered, or a bad limit switch. Since it is intermittent I'd go with the limit switch or covered registers, but need to be there for a good diagnosis. Good luck