ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
Have a Hydro Flame furnace that lights up and burns for approx 5 to 10 seconds then goes out. It tries 3 times then goes into lockout mode. Have replaced the propane regulator and that seemed to work for only one lighting of the furnace then it goes back to a few seconds.
Is it the control board, the sail switch, (doesn't seem likely) or maybe the gas valve???
Hi Joseph, Could be: Dirty plug connector at the board, check the exhaust tube and burner for blockage/nests, burner electrode adjustment, have the board tested, if it's ok look at a possible bad flame sensor. Good luck!