ATTENTION: All Postings that advertise items for sale will be deleted from the Discussion Forum. You may post sale items for free in the Classifieds section. Sign up now.
In addition to my message on 7/27/08. I didn't mention that the furnace does not appear to have any spark. I don't hear the igniter trying to work. As per Keith's advice I did check for obstructions and found none. Thank you. Still trying to determine if the igniter board is faulty.
Hi Don, Now that's a different story, I was assuming you had LP and spark... if you live near an RV repair shop, remove the board and take it in and have it tested if they have a tester. Usually if you don't have spark the PC board is bad. Also you should have 1/8" clearance from the igniter to the burner. Again good luck!