 |
Hello,
Don't know what chassis and what engine is involved?
If it is a Dodge 440, it can probably be done (if it has the middle bolts sunk into counterbores in the manifold, it will require some long allen wrenches). Also note, the bolts go into the water jacket and the coolant should be drained. As for the head, it is more likely the manifold would be warped (these can be resurfaced by a machine shop).
My experience is based on 1979 Pace Arrow quite a while ago.
John Newman
Green Cove Springs, FL |
RV and bus conversion info since 1996.
email John P. Newman
reply to message
search forums