 |
It sounds like somebody abused the switches and they failed. If the pump was left running for a long period of time it would ebventualy fail the motor. First need to check for power to the pump. If there is power the pump is bad. No power check for power to and from the switches and replace all jamed switches. No power to switches look for fuses at pump and in fuse panel blown. Not found problem yet, check ground conection. Then start tracing wires or running a bypass wire to power the switches and pump. Good Luck |
RV and bus conversion info since 1996.
email BUBBA THE BUS TECH
reply to message
search forums